Might be an idea to compare those 1/4" and 1/8" measurements and see what they
are in metric. Should be 3mm and 6mm (rounded) It was at about this time that
the UK started metricating a lot of things - but by no means all of them and
we're still using imperial and metric measurements for different things - oh,
and driving on the left as well :)
Jonmac
To: triumphs@autox.team.net;
6-Pack Triumphs <6pack@autox.team.net>
Sent: Fri, 11 June, 2010 0:11:46
Subject: [TR] Commission Plate Question
> Could someone confirm the lettering
size for the 1974 commission plate.
> From what I've seen (mostly on e-Bay),
it looks to me like the date and
> the paint and trim codes are 1/8", while
the commission number itself is
> 1/4", but I think I've seen a few plates
where the date too was 1/4".
>
> Thanks,
> BobW
> Montgomeryville, Pa.
(suburban Philadelphia)
> 1974 TR6
[demime 1.01d removed an attachment of
type application/ms-tnef which had a name of winmail.dat]
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/macartney.john@yahoo.co.uk
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|