Hi All
I am finishing putting the interior back in after my prolonged engine
replacement.
One of the items that was not working previously was the speedo.
I can connect the speedo to cable and turn the cable at the transmission
side of the cable and get the speedo to move, when it is connected to the
gearbox it will not move. When I disconnect the cable from the speedo the
cable is not being turned by the gearbox.
Different cables and routing ( keeping it out if the normal path do not
change anything)
So I think it is in the OD gearbox where it drives the cable.
How do I verify?
What would I need to do to fix?
Thanks
Tom
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|