Oh... and I have seen a 'make your own cable kit' in the HELP section
of the FLAPS. Comes I think with the inner cable and some parts to
make the ends. Haven't tried it but might work for you.
On 3/22/10, Geo Hahn <ahwahneetr@gmail.com> wrote:
> On 3/22/10, Ed Oot <eoot@citlink.net> wrote:
>> ..the short cable that goes from the EGR meter to the speedo was broken.
>
> Ed -- I have used a local shop that does instrument repair that makes
> replacement inner cables while I wait. They match the fixed end, cut
> to length and then use some special tool (maybe a hammer) to make the
> squared end.
>
> You might check the yellow pages and see if there is one of these
> places in your world.
>
> Geo
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|