triumphs
[Top] [All Lists]

Re: [TR] Water pump housing inlet/outlet question

To: cfmtr3a@verizon.net, triumphs@autox.team.net
Subject: Re: [TR] Water pump housing inlet/outlet question
From: KingsCreekTrees@aol.com
Date: Thu, 11 Mar 2010 20:17:56 EST
Hi Carl;
 
I can't tell you which one is better, but I can tell you of some advice I  
was given reference flow. If the flow is too fast going through the 
radiator, I  understand the coolant will have the opportunity to cool 
sufficiently.  
Therefore, higher flow is not always the best. As an example, an engine 
that has  the thermostat removed will often run hotter because the flow is too 
fast, as  the 'stat, even when it's allowing coolant through, does slow it 
down a  bit.
 
Sorry if that's complicating things.
 
Tim  

Tim Dyer,  Kings Creek Trees and Ornamentals
427 Kings Creek Road, RR3
Ashton, ON K0A  1B0
Canada
Phone/fax: 613 253 4126 Website: _www.kingscreektrees.com_ 
(http://www.kingscreektrees.com/) 

Proud  member of Landscape Ontario (the Ontario association for 
horticulture  professionals), the Canadian Nursery and Landscape Association, 
the 
Ottawa  Botanical Garden Society, the Carleton Place Horticultural Society and 
the  Christmas Tree Farmers of Ontario 

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>