> I'd like
> to have them turned at the shop I use, only they don't have
> a minimum
> rotor thickness spec. for the TR3A.
I have never found an official "minimum thickness" from the factory.
However, the workshop manual says to never remove more than .060", and the
original thickness appears to be .500". So I think .440" is a pretty good
guess.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|