Here's a couple of hard-to-see pics I was able to find in my archives.
Note: This is from a TR4 so perhaps yours is different and ignore the
overflow bottle as TR4's didn't have them and so this mounting is
likelu non-standard.
http://members.cybertrails.com/~ahwahnee/FrontHarnessClips.JPG
http://members.cybertrails.com/~ahwahnee/TR4Straps.JPG
Geo
On 2/7/10, Geo Hahn <ahwahneetr@gmail.com> wrote:
>> I've had no responses on the routing of the wiring for the distributor,
>> horn and coolant temp sensor as it passes over the radiator and
>> fiberboard duct. Anyone got a good idea of the factory routing?
>
> I think you've got the right routing but are perhaps missing the pair
> of clips that hold the harness using 2 of the screws that also secure
> the fibreboard duct.
>
> On mine the harness is also attached to those support rods it runs
> along using the same sort of attachment straps used in other areas of
> the engine compartment.
>
> Geo
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|
