On Thursday 21 January 2010 08:04:35 pm Michael Lang wrote:
> What type of material was used for the front (fixed) portion of the side
> curtain windows? It appears to have been stitched directly to the side
> curtain at the front edge, so I am assuming that it was similar to the
> flexible window material used in soft tops, but I'm not sure. The
> remaining pieces have become hard and brittle with age. If it was a soft
> top type of window material, does it have tendency to flap around in the
> wind?
>
> As you can probably tell, I have never seen a side curtain what was in
> new condition.
>
> Thanks,
>
> Mike
>
Mike,
It is a very thin plexiglass about the same thickness as your top rear window.
But it is rigid. I believe TRF sells kits to replace the front piece and the
rear piece.
Yes it is sewn in the front leading edge.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|