On Sunday 27 December 2009 02:04:06 pm Gary Nafziger wrote:
> I'm in the middle of fitting all the panels on my ground up restoration
> project tr-3 and can't remember where the rear fender brace (distance
> piece?) attaches to the body. This is the piece about 6" long that goes
> right behind the rear wheel and holds the bottom of the fender straight.
> I think it attaches to the leaf spring but can't see anything on the
> spring to attach it too. Didn't notice anything in the Moss catalogue
> either. Just wondering.
>
> gary n.
>
Gary,
There should be a L shaped metal piece welded to the frame similar look to the
piece on the fender. Attached with a 1/4 28 nut and bolt.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|