After the overhaul on my tr-6 I had two oil leaks that were disturbing. One
was a plug missing from the oil galley running along the left side of the
engine, easily fixable. The other was a little more complicated and required
removing the tranny but not the engine. I'd forgotten to install the cap/plug
seal on the rear of the block that covers the end of the cam hole. It looks
much like a freeze plug and is simply inserted and pounded tight. Not sure
whether these issues apply to tr-2 but might be helpful.
gary n.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|