In a message dated 11/30/2009 3:13:43 P.M. Eastern Standard Time,
anabil007@comcast.net writes:
I am sure to be corrected if mistaken, but I believe the two screws
on the windshield stanchion are unique, and of different lengths.
I believe I will go with the screws are screwed up theory. I remember
putting the top screw in, being concerned about the length and therefore not
tightening it properly. Now FT tells me that:
Yes you have 3 different size
screws with the longest in the center, I lean toward the screw being too
long and cracking the glass. FT
Are the correct screws available anywhere? Geez, they are making this
hard. TRF shows only one part # 552662 and has the warning that a screw too
long will crack the glass.
Thanks to all for the information,
Darrell
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|