> The best I can do is sand, wire brush, and degrease.
Just a thought, you might consider using some sort of phosphoric acid metal
prep to remove ALL the rust. I've been using PPG DX579 (I think it is) on
my TR3 springs; but I just saw Readi-Strip Phosphoric Prep & Etch at my
local Home Depot.
Don't know how well it would spray, but the Rustoleum I used many years ago
was still in surprisingly good shape (where it didn't get rubbed off), so
I'm using it again.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|