On 11/21/09, wbeech@flash.net <wbeech@flash.net> wrote:
> Geo,
> Do you use any sealer on either side?
> Bill
I've used Hylomar in the past but as I recall from when I recently had
the valve cover off the remains of the Hylomar were still tacky enough
that I simply put the gasket back on w/o using any additional sealant.
I suspect that a well-broken-in (but undamaged) cork gasket may
actually seal better than a new cork one which presents a flat surface
to the cover and may further compress over time.
Geo
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|