> I can't figure out why a hinge would have
> two numbers
Just a WAG, but I'd guess the drawings originally referenced two different
casting numbers, before some smart guy figured out that the same casting can
be used for front LH & rear RH; by only changing where that changeable stud
is drilled. All of my hinges have had a dimple at the alternate location.
The ones with no numbers probably came from a different foundry/mold.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|