Carl,
I'd be interested to see your comparison.
I have a 6 bladed fan that
came with the TR4A engine that I have in my 3.
As I recall, the bolt holes are
not at 90 degrees. The one on Ted's eBay look to be right on 90 degrees, as
was the case on the Volvo fan. I think that two holes will match up, and if
carefully done the remaining two can be re-drilled to match......
thanks,
Bill
TR3A
________________________________
From: carlsereda
<carlsereda@aol.com>
To: triumphs@autox.team.net
Sent: Sat, October 31, 2009
11:32:59 PM
Subject: Re: [TR] 6-bladed 'Tropical' Radiator Fan Blade
For your
trivia and enjoyment I put two 6-bladed radiator fan blades side by
side in a
photo. Both are claimed to be TR 'Tropical' blades. I believe 'B' s
the one-
not the one just sold on eBay (which is 'A'). Anyone really know? -
I'll send
you the side-by-side picture if you want.
Regards,
Carl
_______________________________________________
Support Team.Net
http://www.team.net/donate.html
This list supported in part by the Vintage
Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|