triumphs
[Top] [All Lists]

[TR] Fwd: Electric fan for a TR4

To: email list <triumphs@autox.team.net>
Subject: [TR] Fwd: Electric fan for a TR4
From: Brian Jones <tr4zest@gmail.com>
Date: Wed, 28 Oct 2009 18:37:42 -0400
They hold no water Tom? You were a brave chap to find out. Good to see the
thermostat at 165 works in the return pipe. What size is your fan and how
have you wired it in?

Thanks,

Brian


On Wed, Oct 28, 2009 at 5:54 PM, <tfansher@comcast.net> wrote:

> I installed a puller fan on my TR3A and am happy I did.  The side rails on
> a TR3 and 4 radiator hold no water (you might want to check this ;^) ) so
> you can mount the puller to the radiator itself.  If you're pulling the
> radiator then while at the shop have them add a receiver for a screw in temp
> sensor. I got my sensor from Jegs and for me the 165 degree works better
> than the 185.  My themistat is in the metal pipe of the radiator hose, but
> had to rig up a ground wire to it for it to work properly.  Also, 165
> because it's in the "middle" of the radiator and heat rises, etc. The fan
> I'm using is a "swirl" bladed, 6 bladed fan. They are supposed to move more
> air than the old style "straight" bladed ones. Some of the local auto stores
> carry them as well as on line sources.
> Any more questions or pictures needed, let me know.
> Tom
> 60 TR3A
> 61 TR3A
> 62 TR4
> 73 Stag
>
>
> ----- Original Message -----
> From: "Brian Jones" <tr4zest@gmail.com>
> To: "email list" <triumphs@autox.team.net>
> Sent: Wednesday, October 28, 2009 3:13:22 PM GMT -05:00 US/Canada Eastern
> Subject: [TR] Electric fan for a TR4
>
> Could the Listerati direct me to a good-quality electric fan for my TR4?
>
> I'm planning to remove the mechanical fan and install Rick Patton's fan
> eliminator kit, making room for an electric puller fan. I intend to control
> the fan with an adjustable thermistat - or maybe a set on/off thermostat,
> let's see what the options are.
>
> If anyone has experience of a successful installation in their TR4 / 4A,
> please lt me know.
>
> I do not want to install the fan using the plastic lugs pushed through the
> radiator vanes - and the same goes for the thermostat.
>
> Thanks,
>
> Brian Jones
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>