> Also, I cannot find the stops that act to control the travel
> on the brake
> and clutch pedals.
They are just ordinary hex-head bolts; 1/4-28 thread by 1-1/8" long. TRF
has em listed under P/N HU709.
Sorry, don't recall where I found washers for the reservoir. But since
there is no pressure involved, an ordinary EPDM washer should do fine.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|