When I fill my TR3 tank to the top, the fuel leaks out the breather and
the sending unit. I bought a new sending unit gasket and plan to put it in
with Permatex non-hardening sealer. Is there anything else to do to the gauge
sending unit so it won't leak? I have considered making paper gaskets and
using about 3 of them with Permatex and screw them down tight.
Also, I see fuel coming out around the tank vent. I have the proper
washers, but they don't seal it up. I was thinking about using homemade
gaskets, Permatex or both. Is there a trick to keep this from leaking?
TIA,
Bill in Tehachapi
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|