Marty,
I used the epoxy system offered by Eastwood. The kit comes with prep, epoxy
primer and epoxy final coat.
I picked satin black.
The project is a 72 TR6.
I used my spray gun to apply both primer and final coat with 1 qt of each.
Some left over after multiple coats.
I believe that using a spray method allows more complete coverage vs. a
brush.
Paint was applied in early spring and still looks great. Pics can be seen at:
http://www.triumphowners.com/1401
I hope to be putting the body on next spring with a completion date of
September 2010.
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|