Unless, of course, you happen to be this guy who has solved that problem
with his TR3. http://www.britishmotoring.net/Archives/2005_Winter.PDF
I wonder if he has started producing conversion kits yet?
Bill Beecher
'58 TR-3A TS/30766 L (On the road in 2009!)
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Bob
Sent: Saturday, September 26, 2009 1:18 PM
To: triumphs@autox.team.net
Subject: Re: [TR] removing radiator without removing apron on TR3A?
On Saturday 26 September 2009 02:55:19 pm cfisher@borgwarner.com wrote:
> I need to remove my leaking radiator from my TR3a. While I'm at it I'm
> going to convert to an electric fan. Is it reasonably manageable to do
> this with just the grill removed, or will I need to take the front
> apron off? I would really like to avoid removing that apron if possible.
>
> Thanks for the advice,
> Curt
Curt,
The only way you can get the radiator out without removing the front apron
is to saw it in half if you can.
I know it is a PITA to remove the apron but there is no easy way to remove
the radiator with the apron on.
If you are lucky and the bolts are not rusted to the caged nuts it only
takes about an hour or so to remove the apron after removing the bumper.
I always loosen all the fender bolts so I can move the front fenders out a
bit for extra clearance.
Bob
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|