List,
Does anyone out there know where I can purchase a diaphragm for a TR6 brake
servo ?
Years ago, I came across two old units, plus the one on my '74 TR6, that I was
restoring.
I opened all three, discovered my original was torn, apparently at manufacture.
I replaced it with the better of the other two diaphragms, had best can
powdercoated (kept mating surfaces bare), replaced the other components with
new, from TRF, and reassembled.
Now, I would like to assemble another, but rubber diaphragms seem to be a
controlled substance.
thanx,
Stan
----- Original Message -----
From: "Blake J. Discher" <bdischer.lists@blakedischer.com>
To: "Triumph List" <triumphs@autox.team.net>
Sent: Tuesday, September 1, 2009 12:04:51 PM GMT -05:00 US/Canada Eastern
Subject: Re: [TR] Servo rebuilder Partco - follow up
On Aug 29, 2009, at 10:24 PM, Blake J. Discher wrote:
> Does anyone know if Partco is still around and rebuilding brake
> boosters? ISTR they were a reasonably priced source and in
> Cincinnati, Ohio. Getting the TR6 ready for the drive to Triumphest/
> NATC and the booster is sorely in need of attention.
Thanks everyone for your help. It appears that Partco is kaput but
Ted Schumacher contacted me to let me know he has rebuilt servos
reasonably priced with exchange. I'm getting one from him.
Cheers,
Blake
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|