Andrew and others;
Isn't the oil pressure reading dependant on how one sets a valve back at the
oil filter?
If that's so, then your 80 psi might read as my 50 psi. Help me out on
this?
Paul Dorsey 60 TR3
----- Original Message -----
From: <dlylis@gmail.com>
To: "Andrew Uprichard" <>; <triumphs-bounces@autox.team.net>;
<triumphs@autox.team.net>
Sent: Tuesday, September 15, 2009 7:34 PM
Subject: Re: [TR] Oil Pressure
> What is this? You show me yours and I'll show you mine?
> ------Original Message------
> From: Andrew Uprichard
> Sender: triumphs-bounces@autox.team.net
> To: triumphs@autox.team.net
> Subject: [TR] Oil Pressure
> Sent: Sep 15, 2009 6:14 PM
>
> List:
>
> Before I give away my numbers, what range (idle to full acceleration)
> should
> one aim for with oil pressure on a TR3?
>
> Andrew Uprichard
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
>
>
> Sent via BlackBerry by AT&T
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|