> Would you advise to pin the shaft after the fact if you have one of
> the pressed on style (bought supposedly as NOS @ and for sure @ NOS
> pricing!)?
I've got an old note from Don Elliott saying it worked for him; perhaps he
will chime in here with more direct (and updated) information.
But with new rotors only $40 from TRF, I'd probably replace them. As I
recall the discussion, it was felt that the knurled shaft was not hardened
as the original shaft was, which might make it prone to break at the slot
for the drive tang.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|