> Instead of this ballast resister wire, I have a black wire
> that I think I
> installed when I bought TRF "sport coil" years ago.
> It was so long ago, but I think the instructions that came
> with the sport
> coil directed me to remove the ballast resister wire
> and run a wire from the coil to the fuse box.
>
> Does this sound correct?
Yup, sounds right. Although there is a version of the "Sport" coil that
should be used with a ballast, I believe TRF only sells the "no ballast"
version.
In which case the white/yellow would do no good anyway and might as well be
left disconnected at the starter. Make sure it can't short out to anything
though.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|