I bought new Trunnions and had the same problem.
Randal is correct the threads are not quite correct.
They would not screw into the verticle link.
My mechanic friend, very gently, screwed them on with cutting compound of
some sort until they would just screw on.
Obvoiously this gently reshaped the threads. Then cleaned all the compound
off once they screwed on with minimal force.
Jim and the 192 TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|