I have never seen instructions in the carpets I have received from
Moss or TRF but if it helps:
The only pieces I glued were:
-- the long sections that run along the inside of the sills
-- the front (vertical) portion of the piece that covers the rear area
-- that semi-circular piece over the diff
I used a 3M automotive spray adhesive.
The only pieces secured with screws were the kick panels in the footwells.
If you have the original snaps on the tunnel and floor you simply
install new Veltex(sp) fasteners to match those.
The inner seat-belt eyebolts secure the rear end of the tunnel piece.
I omit the snaps for the floor pieces as I use extra
padding/insulation making things possibly too thick for snaps. Never
had one fly away.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|