I used their silver high temp powder coat and it's still perfect
several years later. John Mitchell
Earl Bowman wrote:
> Anyone out there had an opportunity to use this DIY ceramic coating on an
> exhaust manifold?
> http://www.eastwood.com/underhood-engine/exhaust-paints/tlc-cast-iron-ceramic
> -coating-4oz.html If so, were you happy with the results?
>
> Exhausted Earl
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|