zowie! that's what a ford small block weighs!
Best,
Ray
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: <triumphs@autox.team.net>
Sent: Tuesday, August 25, 2009 4:32 PM
Subject: Re: [TR] Engine Weight
>> Does anyone know approx. what the weight is for an assembled TR6 engine
>> including crank, pistons/rods, head, cam, rockers, oil pump, oil pan?
>> No manifolds, no gearbox..
>
> I have an old message saved from Dan Masters, which gives 460 lbs
> including
> manifolds, carbs, clutch, etc. (but no fluids or gearbox).
>
> Yours will be lighter without manifolds & carbs, so should be no problem
> with a 500# winch. But you might want to double-check that it is rated
> for
> overhead lifting (some will not hold the weight they are rated to pull)
> and
> of course be sure you have something solid to attach it to.
>
> -- Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|