>I set the crank @ 112 degrees ATDC with the number 1 exhaust fully open.
When I set up a new engine I set the crank on the intended timing mark for
operation, i.e. 12 degrees btc, and then set the distributor with throtor
pointing at number one post. This way the engine is set to fire and run on
the first attempt.
Best regards,
Tom
_________________________________________________________________
With Windows Live, you can organize, edit, and share your photos.
http://www.windowslive.com/Desktop/PhotoGallery
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|