> Don't know if any are used on a TR3, but there are also lots
> of other less-common sizes that are nonetheless standard too.
Oh yes, of course. There are also some other odd sizes found on a TR3, like
the 7/16-32 threads on the shift lever, and the M5-.75 threads on the tach &
speedo mounting studs; not to mention BA (British Association) threads in
many places. I was only trying to list the NF sizes used.
1/4-27 isn't listed in my chart; but there is a 1/16-27 NPT thread that is
only slightly larger than 1/4". And there are a few NPT threads on a TR3 as
well.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|