On Mon, Aug 17, 2009 at 9:41 PM, Gary Nafziger <nafzigerg@yahoo.com> wrote:
> I'm still working on fine tuning a new engine overhaul.
>
> It would be helpful
> for me to get some "real life" feedback from people who have more knowledge
> and experience than me in the area of up-rated cams.
>
> I have an S2 which has
> lift of .405"............duration of 282 degrees and power band of
> 3500-6000.
> How would you rate this cam on a scale of 1-10 with 1 being stock
> ..............and 10 being full race with no idle or street driveability?
5 or 6. I had an S-2 clone in the 70's, and it was fine on the street. It
was a poorly made clone however, and wore out in 19,000 miles. I wanted a
well made cam from a reliable source so I replaced it with a tuftrided Isky
Z-19, which is slightly milder than the S-2, in 1985. I still have that cam
in my car. Thinking about your situation, I paid particular attention to my
car as I took a nice drive with it Saturday. My car idles at about 1000 rpm,
and it is relatively smooth at that speed. It is easy to launch, at
1000-1200 rpm, even with a Fidenza flywheel. I have no idea why you are
having so much difficulty, but IMHO, what you have is very streetable and
you should be able to drive and enjoy it.
Irv Korey
74 TR6 CF22767U
Highland Park, IL
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|