Art Lipp makes a kit using Delrin and it's very easy to install. You can see
it here http://tr6.danielsonfamily.org/AcceleratorShaft.htm
Guys have also done with them brass bushings as I did at first but I like
the idea of Art's all in one kit better.
Bob
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Bob
Sent: Wednesday, August 12, 2009 12:42 PM
To: triumphs@autox.team.net
Subject: Re: [TR] TR6 Pedal Shaft Bushings
On Tuesday 11 August 2009 06:22:50 pm Ed Woods wrote:
> List,
>
> Wasn't there someone making a brass/bronze bush for the TR250/TR6
> pedal shaft to replace the nylons originals that are so difficult (read:
> impossible) to install? Info appreciated and thanks in advance.
>
> Ed Woods
Ed,
Art Lipp make a kit for the 6 with instructions etc. The bushings not brass
but I am told it is easy to install.
Bob Danielson has a link on his 6 web page on the install.
My kit is still in the box as it wont be installed until early next year.
Bob
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|