triumphs
[Top] [All Lists]

Re: [TR] Installing engine in TR2/3

To: triumphs@autox.team.net
Subject: Re: [TR] Installing engine in TR2/3
From: Bob <yellowtr@adelphia.net>
Date: Sun, 9 Aug 2009 19:22:18 -0400
On Sunday 09 August 2009 06:53:55 pm Angelo Graham wrote:
> Hello Listers:
> Approaching the engine installation stage on my long TR2 resto and
> wondering if installing engine/trans/od as a unit makes more sense
> than mating trans to engine in the car. The engine compartment is
> freshly painted, so some anxiety around clearances, etc. Have got the
> steering cross-shaft out, so have a bit more clearance from the front.
> Any advice from past experiences? Engine and trans came out
> separately, but that operation is usually easier with old paint in
> engine compartment.
> Thanks for any help with this.
> Angelo Graham
Angelo,

I believe it is easier to install both as a unit. I always have.

You can install the engine separate, but it is not an easy job mating the 
trans to the engine. But I also have done it in the past, many years ago when 
I was much younger.

Just be careful and get some help to guide the transmission.

Bob
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>