Bryan Loy wrote:
> has your engine deck been check for high spots or dips? i know this sounds
> obvious, but it has been over looked before
> Bryan
>
Slight differences in liner height can cause gaskets to blow & cause
troubles. Greg Solow had something to say about that which I captured
in the net nuggets section of my web site:
www.tjwakeman.net/TR/Net_TRheadGasket.htm
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|