On Sat, Jul 25, 2009 at 7:06 AM, Randall <tr3driver@ca.rr.com> wrote:
> ...then adjust the stop (adding one if necessary) to get .010". The stop
> screw effectively prevents the slop in the pedal/pushrod joint from adding
> to pedal travel.
>
If it is of any help, here's a pic of the adjustment screws I added to my
TR3A (screws were not originally there but the holes were still there in the
box):
*http://members.cybertrails.com/~ahwahnee/StopBolts.JPG*<triumphs@autox.team.net>
Did it to take up some of the slop from wear in the pedal hole. Yes, I know
the pedal box should be black... someday... maybe.
I've heard it said that the adjustable steering wheel can be moved through
the full range from 'Too Close' all the way to 'Much Too Close'.
Geo
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|
