> I am not ready to tackle that as yet but am now just contemplating the
> plan of attack. ISTR that I can get the seal housing off by removing the
> flywheel, but the big question is, can I replace the seal with everything
> in situ.
Assuming you mean you have already installed the lip-type seal, and are just
trying to get it to work, it can be done. Whether it is advisable or not is
a different question <G>
Check out the write-up from British Frame and Engine at
http://www.socaltriumphs.org/docs/mainseal.htm
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|