Found some at my FLAPS.
Thanks to all,
Bill
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Karl Vacek
Sent: Monday, June 22, 2009 4:25 PM
To: triumphs@autox.team.net
Subject: Re: [TR] LTD Pegs & Washers(?)
If they're not available locally and TRF doesn't have them any more, clear
plastic washers are stock aircraft parts from Aircraft Spruce - many sizes
available.
Karl
> 6/22
> I seem to recall a couple of years ago that Charles (TRF) had located
> some small diameter white plastic washers to go under the lift the dot
> pegs specifically to keep from chipping paint, etc. I would inquire
> again............
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech@flash.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|