OK List...here's another weird one for you. I'm working on my '60 TR3A and
I need new brackets that mount on the door-posts...both of my brackets were
broken off decades ago. These are the brackets that the "Door Check Assy"
(Moss PN 803-600) attaches to so the door doesn't open too far. There's one
bracket on each door, and each one appears to be bent out of a single piece
of metal, and welded to the door post from behind the fender (at least
that's my guess).
I'm thinking I might have to fabricate the parts myself. I have a photo of
a supposed good bracket, but I am looking for more information before I
tackle the fabrication job:
1. Does anyone know of a source for these parts?
2. Have any of you fabricated one, and if so, do you have a template I
could copy?
Thanks in advance,
Steve Ball
Lompoc Ca
TS68164L
Email: banjonut@verizon.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|