Both corners are bent inward on TS11544L. I always wondered if they were
that way from the factory! I didn't straighten them as I figured the
cappings would cover them up.
Mike
>> On one side of the car it is folded over - on the other
>> it
>> is more upright, creating a rather sharp edging.
>>
>
> Carl, on TS13571L both sides are folded over. I checked this morning, but
> didn't have time to take pictures; possibly I could get some tonight.
>
> ISTR that TS39781LO is more like you describe, one side folded almost to
> right angles, and the other side only bent a little. I'm guessing that the
> original factory workers just gave them a swipe with a hammer, and didn't
> particularly worry about the angle as long as the dog leg capping fit in
> place.
>
> -- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|