Bob,
In my opinion the best harness on the market is made by Advance Auto Wire
(http://www.advanceautowire.com/) but it is by no means an "original"
harness. It does away with all of the stock fuses and relays and replaces
them with a heavy duty power block consisting of 7 relays and 8 fuses. Every
piece of wire is at least a gauge up from standard. It basically brings our
cars up to modern wiring standards. After the death of the previous owner,
Mike Masters, Steve Carrick obtained the business and is about all caught up
with back orders. I have one of the early TR6 harnesses in my car and I
haven't had a single electrical problem or blown fuse in 4 years now. My
installation is here http://tr6.danielsonfamily.org/Wire_Harness_1.htm
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Bob Jones
Sent: Tuesday, June 02, 2009 10:10 AM
To: triumphs@autox.team.net
Subject: [TR] Wiring
Do any of you have any experience with wiring harnesses from British Wiring
in Penn.? Any harness recommendations?
Thanks
Bob
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as 75tr6@tr6.danielsonfamily.org
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|