Thanks Randall, to everyone,
Is there anything else that I should know (or order) before I take my old
w/s to a classic car W/S shop (I think I want this done professionally,
isn't this a good idea?). Also, any special instructions that I should give
to the Professional?
Although it's not original, I'm replacing the cracked glass with a new
tinted version that's only 1/4" thick- Is this the thickness of the
original? It's FYG Brand, made in China but was ordered from
www.prosourceglassintl.com.
Thanks, Paul 60 TR3a
--- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'list Triumph'" <triumphs@autox.team.net>
Sent: Monday, June 01, 2009 1:10 PM
Subject: Re: [TR] w/s corner brackets
>> Are the 2 corner brackets (Moss shows them as
>> #802-675) within the w/s frame?
>
> Yup, they hide inside the frame; you won't see them until you start to
> take
> it apart. The screw heads can be seen through the slots in the bottom and
> sides of the frame; there are clearance holes so the screws can be
> removed.
>
> Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as dorpaul@bellsouth.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|