I sell a Leather gear shift boot for the TR6, it could possibly be used on
the TR3.
The leather boot fits over the rubber boot. It does not replace it.
I also have one for the MGB, which may be more appropriate for the TR3,
since it has a collar on it which is held down by the gear shift ring.
Al Salvatore
Photos at photobucket.
http://s246.photobucket.com/albums/gg107/6parts/74tr6/gators/
----- Original Message -----
From: "Geo Hahn" <ahwahnee18@gmail.com>
To: "TR List" <triumphs@autox.team.net>
Sent: Friday, May 22, 2009 10:24 PM
Subject: Re: [TR] gear shift boot
> On Fri, May 22, 2009 at 6:17 PM, Bob <yellowtr@adelphia.net> wrote:
>
>> Has anyone out there in TR land replaced the rubber boot with a vinyl or
>> leather setup similar to what is used on the TR6? Seems the way to go
>> since
>> the current rubber parts are made out of used you know what!
>
>
> Seems like I see a leather boot on eBay that is listed as 'for a TR3' from
> time to time. But then I see a lot of things on eBay for TR3s that raise
> serious doubts.
>
> Last time I replaced the boot I bought 2 -- that may be the secret as the
> replacement has lasted for about 7 years.
>
> Geo
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tr6parts@charter.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|