Is that Moss head gasket a Payen? Ken Gillanders steered me to this when
I used 87mm. He advised against the commonly used County gaskets. He also
steered me to Mordy Dunst, The Gasket Works if I had difficulties, which I
didn't.
Also what was the "proudness" of your cylinders. I did all I could to get
to the .005" end of the range and finally used copper Fo8s that I got from
TRF as they were slightly thicker than all the steel Fo8s I could get.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy
Steps!
(http://pr.atwola.com/promoclk/100126575x1221621499x1201450105/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Apr
ilExcScore428NO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|