While the iron is hot, can I ask the correct diameter for the seal for
the trailing edge of the door, mine being early TR2 is the fabric/
leather covered "tube" with the extra material attaching behind the
wheelarch panel. The one supplied by my trimmer is very thick, over
3/4" and is a length of hosing I guess, but when the door closes it is
put under serious pressure and is also sits very close to the door
catch.
John
1954 TR2 (long door)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|