Many thanks to those that replied w/sound advice to my questions about my
pertronix not producing anything.
I turned the key over, make sure everything was hot, tested my test light
against the hot side of the battery to make sure I had a good ground on it, the
hit both sides of the coil, and nada. Zip. I had my daughter turn the key
over while I did the same, again w/no results.
One thing I did notice, there is a bit of "wiggle" movement of the dist. when
the engine is being cranked. Is this normal? I found one bolt that was loose
and tightened it, but the movement is still there. I don't remember ever
seeing this before. Any ideas? Thanks in advance,
Bryan
19071 TR6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|