The brake hoses come almost vertically out of the calipers and then make
a bend down to the brackets under the turret braces. Where they start to
bend above the calipers, they touch the ball joint boots. Not with any
significant force, but they touch. Is this normal? I tried twisting the
bracket end of the hose a little to gain some clearance when I tightened
the nut, but wasn't happy with the result.
Thanks,
Mike
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|