In a message dated 1/1/2009 9:47:05 P.M. Eastern Standard Time,
tr3driver@ca.rr.com writes:
I just scraped the paint off the factory connections.
This, I have done. But it occurred to me that the battery grounds to the
body and the motor grounds to the chassis and the body mounts are all rubber
so
the bolt passing through the body to the threads in the chassis are the link
between the two. I did not have the foresight to make sure there was at
least one unpainted connection in the body mounts and I did not chase the
threads in the chassis with a tap. Might this be the source of the problem,
or am
I missing something? I am going to clamp a hard ground with jumpers to the
starter and see what happens.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************Stay up-to-date on the latest news - from fashion trends to
celebrity break-ups and everything in between.
(http://www.aol.com/?ncid=emlcntaolcom00000024)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|