John,
I built one for my TR6 that is a little different design in that it can be
raised and lowered and has glass(green tinted) instead of lexan or
plexiglass.?? I put some notes on my progress at triumphowners.com/108 towards
the bottom of the page under special projects.? It should be noted that the
when I wrote the article and took the pictures on the site I used lexan and cut
it with a dip in the middle.? When I replaced the lexan with glass I went with
a straight top design.? Take a look and yell if you have any questions.? The
set-up works very well.
Aaron
Aaron Cropley
71 TR6 (Throttle Body Injection!)
http://www.triumphowners.com/108
2002 Mini Cooper S
Topsham, Maine
-----Original Message-----
From: 60TR3A <60TR3A@cox.net>
To: Triumph car discussion Sports <Triumphs@autox.team.net>
Sent: Sun, 7 Dec 2008 3:46 pm
Subject: [TR] TR3A Wind blocker????
I remember Bob Danielson talking about installing a wind blocker on
his TR6. As the weather begins to turn chilly here in Phoenix I was
thinking about trying to do the same for my TR3. I would drive the TR
to work more often in the "winter" here if I had a wind blocker & was
trying to figure if I could build or install one on my TR3A.
Do if anyone knows of any available kits or sources of information for
a TR3A wind blocker?
Thanks
John
John A. Wise
Glendale, AZ
1960 Triumph TR3A
Commission No: TS80422L
http://members.cox.net/60tr3a/
http://www.triumphowners.com/876
1977 Porsche 911S
http://members.cox.net/porsche911s/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|