I do similar, but I use a long skinny dowel rod that has a little
flex to tape a string to and use it to pull the string down the tube.
Its smooth and easier for me I think. but hey, what works is what works!
Doug
At 07:24 AM 12/1/2008, DLylis@aol.com wrote:
>I
>fully assembled the wheel, stator tube, wires, on the bench, then taken a
>coat hanger and straightened it out like a long spear, tied a string
>to one end,
>and shot it down the column and pulled it out so the string hangs out on
>both ends. Tie the wires with the string and one person guides
>the stator tube
>and the other pulls the string.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|