What's the torque spec for the nut the holds the front spindle onto the
vertical link for a TR3?
My shop manual doesn't specify the torque for these. They must be pretty
tight because the spindle really let go with a bang when I pressed it
out of the vertical link!
Thanks,
Mike
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|