We are trying to hook up the wiper motor on my "62 TR-3. The diagram in the
Workshop manual shows a two wire hookup but the wiring loom has three wires
and the motor has three terminals. With all three wires hooked up the motor
runs continuously with the switch on or off. It also smelled hot.
Any suggestions on how we can make it work right and park properly?
Gary B
**************Get the Moviefone Toolbar. Showtimes, theaters, movie news &
more!(http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redir=htt
p://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|